Product ID:5052, EMERALD RAM HS PLASTIC
MSDS Date:03/01/1986
FSC:8030
NIIN:00N032286
MSDS Number: BNSNB

C-E REFRACTORIES

VALLEY FORGE, PA 19482
US

Emergency Phone: 215-337-1100

Info Phone: 215-337-1100

Cage: 8C482

C-E REFRACTORIES DIV OF COMBUSTION ENGINEERING

KING OF PRUSSIA, PA 19406 US

Telephone: 215-337-1100

Cage: 8C482

PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: <10%

OSHA PEL 1 MG/M3; 3 STEL

ACGIH TLV: 1 MG/M3; 3 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CHROMIUM OXIDE; (CHROMIUM OXIDE PIGMENT GRADE)

CAS: 1308-28-9

RTECS: GB6475000

Fraction By Weight: <10%

OSHA PEL 0.5 MG/M3 (CR)

ACGIH TLV: 0.5 MG/M3 (CR)

SILICA; (CRYSTALLINE SILICA (FREE SILICA))

Fraction By Weight: <1%

ALUMINUM OXIDE; (AL*2O*3) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON (III) OXIDE; (FE*2O*3)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

ALKALIES

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EMERALD RAM HS CAN CAUSE IRRITATION TO
THE EYES ON CONTACT AND TO THE SKIN ON PROLONGED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH OFF THOROUGHLY USING A MILD SOAP AND WATER. EYES:
FLUSH THOROUGHLY (AT LEAST 15 MINUTES) WITH WATER. CONSULT MD.
INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT
BREA THING (GIVE O2/ARTIFICIAL RESPIRATION) .

Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE TO THE
SURROUNDING AREA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS PRODUCT IS A NON-COMBUSTIBLE
REFRACTORY.

Spill Release Procedures:SPILLS SHOULD BE CLEANED UP TO AVOID SLIPPING.
CLEANUP PERSONNEL SHOULD AVOID SPLASHING AND SPATTERING OF
MATERIALS. PERSONNEL SHOULD WEAR CHEMICAL GOGGLES, RUBBERIZED WORK
GLOVES AND APPROPRIATE CLOT HING FOR EYE AND SKIN PROTECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NORMAL CONDITIONS OF STORAGE AND USE.
PREVENT EYE AND AVOID SKIN CONTACT WITH THE MATERIAL.
Other Precautions:REMOVAL AFTER SERVICE PREC: KEEP DUST IN WORK AREA AT
A MIN & MAINTAIN AIR CONC OF DUST AS FAR BELOW PEL AS FEASIBLE. USE
GOOD HOUSEKEEPING TECHNIQUES, SUCH AS, VACUUMING TO REMOVE
COLLECTED DUST & PV NT FORMATION OF DUST CLOUDS. (SUPP DATA)

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORS SHOULD BE USED
FOR DUST LEVELS BELOW 50 MG/M3.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APPROPRIATE CLOTHING FOR EYE AND SKIN
PROTECTION.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: FOLLOWING ARE RECOMMENDED PREC TO BE TAKEN DURING REMOVAL:
1. EMPLOYEES SHLD BE APPRISED OF THE HAZ & PROPER CNDTNS & PREC FOR
SAFE USE OR EXPOS. 2. NIOSH/MSHA APPRVD RESP SHLD BE USED FOR DUST
LEVELS BELOW 50 MG/M3. 3. DUST GENERATION SHLD BE MINIMIZED BY USE
OF DUST CONTROL EQUIPMENT OR WATER SPRAY.

HCC:C1
Solubility in Water:SMALL AMT DISPERSES.
Appearance and Odor:GREEN MOLDABLE MIXTURE OF AGGREGATES & MOIST
BONDING MATLS-SLIGHT PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:AS OF MAY, 1984, THIS PRODUCT IS NOT CONSIDERED
A HAZARDOUS WASTE WHEN DISCARDED AS DEFINED IN THE UNITED STATES
EPA REGULATION (40 CFR 261). DISPOSAL SHOULD BE IN ACCORDANCE WITH
FEDERAL, STATE AND L OCAL DISPOSAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.